You can tell a lot about a ski by its immediate family. Rossi’s Hero Elite Plus Ti is closely related to the Hero Elite LT Ti and ST Ti, both legit non-FIS Race models, even though the Plus Ti’s plus-sized shape (78mm) is many mm’s more ample than the 71mm waist of the LT Ti and 68mm midriff on the SL Ti. The Hero Elite Plus Ti not only uses the same construction as its gate-bashing sibs, its sidecut radius is the same as the ST’s in the167cm size preferred by slalom specialists.
Two years ago, Rossi converted all of the Hero Elite clan to a new damping system, Line Control Technology. (LCT). Instead of using horizontal sheets of Titanal, as has been the case for decades among race models, LCT uses a vertical Ti laminate down the center of the ski so the forebody is more resistant to deflection. Torsional rigidity is softened a tad to allow the deep sidecut to engage gradually and progressively as the ski is tipped and pressured. “Stable and forgiving into the turn,” assures Scott Sahr from Aspen Ski and Board, “without compromising edge contact.”
This year, Liberty moves its VMT—Vertical Metal Technology—into its women’s line of all mountain skis with two new Evolv models, and all I could utter after trenching up Steamboat’s corduroy during a ski test is a breathy, “Thank you.” The 84 is a built to be an all-terrain vehicle (between the racy V and freeride Origin lines), with a touch of tip rocker and progressive flex, but it definitely prefers to mach the groomed at eye-watering speeds. That’s not to say it’s impatient, however; it will hold your hand and coach you into a carve if you’re an advanced intermediate. As for the VMT (which made its women’s debut last season in the V frontside carvers), I’m not sure how this homegrown brand in the Vail Valley managed to invent something so groundbreaking, but I do know it works.. In my humble opinion, it unequivocally puts this former pow-ski brand in the big leagues when it comes to edge grip and stability.
The new Blizzard Firebird HRC isn’t really a race ski – its dimensions run afoul of FIS regulations – but don’t tell it that. Despite its 76mm waist, the HRC thinks it belongs right between the Firebird WRC and Firebird SRC, Blizzard’s non-FIS GS and SL models, respectively. It may not be exactly what a meld of the WRC and SRC would look like, but it mimics their race-room construction and does its best to match their capabilities.
Please don’t get defensive, but if you don’t care for the HRC’s comportment, you may not be good enough for it. It uses bi-directional carbon weave both horizontally underfoot, for power at the top of the turn, and in vertical struts that keep it plastered to the snow through turn exit. The combination makes a ski that Corty Lawrence describes as feeling like a “quintessential GS. It needs to be stood on, no complacency allowed, don’t get lazy.
“When you stand on the edge at operating speed,” Corty continues, “the HRC is exceedingly rewarding. Super confident underfoot, it enters turns with enthusiasm (better be on the front of your boots!) and comes off the turn with ample energy (better be where you¹re supposed to be here, too!) Turn shape can be modulated with authoritative subtlety, which isn’t the contradiction it sounds like. Shorter turns can be accomplished at speed, but at pedestrian velocities it must be muscled,” Corty concludes.
All carving skis are judged by how well they maintain edge connection on hard snow. Classically, the key to keeping a ski quiet all along its edge was to ladle on the Titanal, a proven method that achieves its damping objective in part by its mass. As a leader in lightweight design, V.Werks instead turned to its wheelhouse material, carbon, to make a damp, non-metal ski that would be light and responsive.
Several factors work together to make the Deacon V.Werks easy to steer into a tight-radius turn without a lot of encouragement from the pilot. The cambered center section of its 3D Radius Sidecut is slalom-turn tight (14m@172cm); all the skier has to do to activate it is raise the edge to a high angle, a normal move for anyone who knows how to carve. To make it easier to depress into a deep carve, the abbreviated camber line underfoot is fairly shallow and soft. The tip and tail rockers are long and gradual so the long-radius zones at front and rear don’t interfere with the ski’s quickness edge to edge. The absence of metal and low elevation of the Marker system give the Deacon V.Werks a clarity of snow feel and lively energy that’s relatively rare among elite carvers. In short, V.Werks hit its target: the Deacon is a high-energy carver that’s simplicity itself to steer for skiers with the requisite skills.
The most obvious reason why the Disruption 82 Ti comes across as easy to ski is its width; at 82mm underfoot, and with a less radical sidecut than most Frontside Power skis, it’s easier to throw into a drift and it won’t buck when introduced to ungroomed terrain.
The less transparent reason pertains to how it’s built: the Ti I-Beam that gives the Disruption 82 Ti its bite is only as wide as its midsection. This gives the edge elsewhere a subtle flexibility that’s ideal for anything but boilerplate or frozen ridges of spring corduroy. In softer snow, the less critical edge won’t try to dig its way to China the way a super-charged Power ski may. On mid-winter, early AM groomers, it’s delicious.
While it’s definitely a carver of the kinder, gentler variety, beneath its easy-going veneer it’s still a trench-digger at heart. The widest model in the Disruption clan, the 82 Ti is predisposed to a medium-radius arc that it can reel off without much effort on the pilot’s part. It stays connected in part because the Ti I-Beam runs tip to tail and in part because its baseline has only a teensy bit of tip rocker that doesn’t prevent the low-to-the-snow shovel from finding the edge at the top of the turn.
